S/SX1800
Series
Pitch
180 mm
180 mm
Inner heights
88 – 110 mm
88 – 110 mm
Outer widths
180 – 1000 mm
180 – 1000 mm
Bending radii
265 – 1300 mm
265 – 1300 mm
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Special designs
S/SX1802 – with closed stroke system and straight link plates- Closed stroke system protected between link plates mounted on both sides.
- Symmetrical side band design.
- Long service life even under the toughest conditions, e.g. large amounts of foundry sand, emery or scale thanks to optimized cable carrier geometry.
- Open stroke system.
- Link plates of the side bands are mounted offset.
- Long service life even under the toughest conditions, e.g. large amounts of foundry sand, emery or scale thanks to optimized cable carrier geometry.
- The optimized, “self-cleaning” geometry prevents blocking of the stops through dirt.
- Version with bolted side bands.
Stay variants
Additional stay variants
S/SX tubes
S/SX tubes
Also available as covered variants with cover system or steel band cover.
more details ...
Installation dimensions
Unsupported arrangement
×![]()
KR [mm] |
H [mm] |
LB [mm] |
UB [mm] |
|---|---|---|---|
265 | 740 | 1552 | 695 |
320 | 850 | 1725 | 750 |
375 | 960 | 1898 | 805 |
435 | 1080 | 2087 | 865 |
490 | 1190 | 2259 | 920 |
605 | 1420 | 2620 | 1035 |
720 | 1650 | 2982 | 1150 |
890 | 1990 | 3516 | 1320 |
1175 | 2560 | 4411 | 1605 |
1300 | 2810 | 4804 | 1730 |
Installation height Hz: H + 10 mm/m
Load diagram for unsupported length depending on the additional load.
Intrinsic cable carrier weight qk = 26 kg/m. For other inner widths, the maximum additional load changes.
Speed
up to 2 m/s
up to 2 m/s
Acceleration
up to 3 m/s2
up to 3 m/s2
Travel length
up to 17.8 m
up to 17.8 m
Additional load
up to 60 kg/m
up to 60 kg/m
×![]()
Gliding arrangement
×![]()
Speed
up to 0.8 m/s
up to 0.8 m/s
Acceleration
up to 2 m/s2
up to 2 m/s2
Travel length
On Request
On Request
Additional load
up to 60 kg/m
up to 60 kg/m
The gliding cable carrier must be guided in a channel.
More information
Glide shoes must be used for gliding applications.
