Stay variant 030 – with externally opening and detachable crossbars

TKR0260 030 Stay variants

Properties

  • Low-vibration plastic frame with particularly long service life thanks to molded chain links.
  • Swivable and detachable on one side in any position.
  • Outside: Swivable and detachable
  • Inside: detachable
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 50 – 200 mm

Dimensions

Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t for odd number of chain links
Dimensions
hi
[mm]
hG
[mm]
Bi
[mm]
Bk
[mm]
qk
[kg/m]
40 54 50 62 75 87 100 125 150 200 Bi + 26 1.50 – 2.70
KR
[mm]
75100125150

Order example

Order code

TKR0260

100

030

125

800

VS

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).

Fixable dividers are available for applications with lateral accelerations and for applications lying on the side.
The arresting cams click into place in the locking grids in the crossbars (version B).

Divider system TS0 without height separation
TKR0260.030 TS0
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A385.6
B85.64
Bi [mm]
aT min [mm]
50
5
62
7
75
5.5
87
3.5
100
6
125
6.5
150
7
200
4
Divider system TS1with continuous height separation
TKR0260.030 TS1
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A385.62
B85.642
Bi [mm]
aT min [mm]
50
5
62
7
75
5.5
87
3.5
100
6
125
6.5
150
7
200
4
Divider system TS3with height separation made of aluminum partitions
TKR0260.030 TS3
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A326202
B282242
Bi [mm]
aT min [mm]
50
5
62
7
75
5.5
87
3.5
100
6
125
6.5
150
7
200
4

The dividers are fixed by the partitions, the complete divider system is movable in the cross section.

Important information

Aluminum section subdivisions are only available with ax > 26 mm.

Order example

Order code

TS0

A

3

VD0

VD1

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

UMB end connectors UMB – plastic

The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom or face on.

Important information

Recommended tightening torque:
0,6 Nm for screws M4

Bi
[mm]
BEF
[mm]
nz
50
76 2 x 3
62
88 -
75
101 2 x 5
87
113 -
100
126 2 x 7
125
151 2 x 9
150
176 2 x 11
200
226 -
Connection point

F – fixed point
M – driver

Connection type

U – universal mounting bracket

Order example

Order code

UMB

F

U

UMB

M

U

End connector

UMB

UMB

Connection point

F

M

Connection type

U

U

Important information

We recommend the use of strain reliefs at the driver and fixed point.